Home > products > Pilot TFD10 Refrigerated Compressed Air Dryer System

Pilot TFD10 Refrigerated Compressed Air Dryer System

The Pilot TFD10 Refrigerated Compressed Air Dryer System is rated for Australian conditions, with a flow rate based on an ambient temperature of 35°C. It offers a cost-effective air treatment solution, with reduced downtime, lower equipment maintenance costs and improved product finish.

Fitted with the efficient ALU-DRY heat exchanger, high-efficiency compressors, hot gas bypass valve and low-pressure drop, the system also offers reduced energy consumption.

Upgraded electrical control panel
Hot gas bypass valve
Condensate drain
Rated for Australian conditions with a flow rate based on an ambient temperature of 35°C

Product Manual Brochure

Specifications

Model	Flow Rate		Power Supply	Port Sizes	Dimensions mm			Weight
	(L/sec)	CFM	Voltage	In/Out	Width	Depth	Height	kg
TFD 10	16.5	35	240	1/2″ BSP F	226	507	532	27

Technical data conforms to +/- 5%. Pilot Air reserves the right to modification without notice for design and technical improvements.
Warranty: 12 months on all products listed.
A 3 micron Pre-Filter is required to be fitted in the compressed Air System prior to the dryer to ensure product warranty.
For over 40 years, Pilot Air Compressors have been meeting the needs of industry. Ask us about your requirements.

Data refers to the following condition: Ambient temperature of 35°C, with inlet air at 7 bar and 45°C. Pressure dew point as per Class 5-ISO Standard 8573.1.

Maximum working conditions: Ambient temperature of 50°C, inlet air temperature 70°C and inlet pressure 14 bar (16 bar TFD 6-22).

The Pilot TFD 10 Refrigerated Compressed Air Dryer System operation is monitored by a digital thermometer in the control panel. The innovative new hot gas bypass valve incorporates greater precision and accuracy, preventing the formation of ice inside the evaporator under any load condition. Set during final testing, the valve requires no further adjustments.

All models are also fitted with a timed electronic drain, which allows for the adjustment of discharge and pause times. The generous sizing of the condenser ensures maximum performance of the refrigerant circuit and the ability to operate with changes in conditions, while also offering easy access for cleaning and maintenance.

Air Compressor Products

From air compressors through to compressed air storage, treatment and distribution, our extensive range of compressed air products ensures we have the right solution for your business needs, no matter the industry or application. We also offer custom-built packages and compressed air systems that are fit for purpose and tailored to your budget.

Frequently Asked Questions

What does “Built for Australian conditions” mean for the Pilot TFD10 system?

The Pilot TFD10 Refrigerated Compressed Air Treatment System is engineered to handle Australia’s tough climate — from high heat and humidity to variable workloads — making it a reliable choice for Sydney workshops and industrial facilities.

What are the technical capabilities and sizing of the TFD10 system?

The TFD10 system is designed for larger compressed air setups, offering higher capacity moisture removal, consistent dew point control, and low pressure drop. It’s an energy-efficient choice for businesses that require higher air volume performance.

Does the TFD10 meet safety, electrical, and environmental standards for Sydney / NSW?

Yes. The Pilot TFD10 complies with Australian safety and electrical standards, and is trusted by businesses across Sydney that demand fully certified, compliant compressed air treatment.

What is included in the standard package when purchasing the TFD10?

Every TFD10 unit comes factory-tested and ready to install, with a refrigeration dryer cabinet, integrated heat exchanger, moisture separators, user-friendly controls, and filters included.

How should I maintain the TFD10 to ensure long service life and reliability?

To keep your Pilot TFD10 system operating at peak performance, schedule regular filter changes, check condensate drains, clean heat exchanger surfaces, and monitor refrigeration unit function. Pilot Air provides Sydney-based servicing and spare parts for ongoing support.

Pilot Air Reviews

We have a growing manufacturing business and our air supply needed to be upgraded to deliver to a clean volume of air to specific machines and mainly our spray booth. 3 Months ago the team at Pilot Air evaluated our requirement and delivered an excellent solution, we have had time to run the system for a considerable time and found it to be excellent. Also Australian Manufactured to boot. Very Happy.

Brett

My husband recently bought a second hand Trademaster 12 air compressor in need of some maintenance. He took it to the Silverwater servicing centre with no prior arrangement. The staff were polite, obliging, and eager to help, and he was impressed with the service provided. Well done Pilot Air!

Donna Slater

I would just like to thank Debbie and the team at Pilot Air Compressors Service Department for a great job done this morning.
Excellent job done, Great Staff & Great Service
Thank you Debbie & the team at Pilot Air Compressors…
Geoff Bryce
Bryce Pest Control Pty Ltd.

Geoff Bryce

Thanks Pilot Air! We have just purchased our third pilot compressor (K50). Our oldest one (K25) is 14 years old and still going strong, used all day every day only replaced pressure switch.

Michael Mourad

The Compressed Air Experts

1300 667 579

NSW
Head Office & Manufacturing
115 Beaconsfield Street,
Silverwater, Sydney NSW 2128

Service and Spares Division
21-25 Stubbs Street,
Auburn, Sydney NSW 2144

Contact Pilot Air

Get in touch to see how we can help you find the right compressed air solution.

VIC Branch | Ph: 1300 667 579

QLD Branch | Ph: 07 3279 1213

WA Branch | Ph: 08 9424 2800

SA Branch | Ph: 1300 667 579