Home > products > Pilot TFD72 Refrigerated Compressed Air Dryer System

Pilot TFD72 Refrigerated Compressed Air Dryer System

The Pilot TFD 72 Refrigerated Compressed Air Dryer System is rated for Australian conditions with a flow rate based on an ambient temperature of 35°C. It offers a cost-effective solution, with reduced downtime, lower equipment maintenance costs and improved product finish.

Fitted with the efficient ALU-DRY heat exchanger, high-efficiency compressors, hot gas bypass valve and low-pressure drop, the system also offers reduced energy consumption.

Upgraded electrical control panel
Hot gas bypass valve
Condensate drain
Rated for Australian conditions with a flow rate based on an ambient temperature of 35°C

Product Manual Brochure

Specifications

Model	Flow Rate		Power Supply	Port Sizes	Dimensions mm			Weight
	(L/sec)	CFM	Voltage	In/Out	Width	Depth	Height	kg
TFD 72	119.9	254	240	1 1/2″ BSP F	354	776	987	67

Technical data conforms to +/- 5%. Pilot Air reserves the right to modification without notice for design and technical improvements.
Warranty: 12 months on all products listed.
A 3 micron Pre-Filter is required to be fitted in the compressed Air System prior to the dryer to ensure product warranty.
For over 40 years Pilot Air Compressors has been meeting the needs of industry. Ask us about your requirements.

Data refers to the following condition: Ambient temperature of 35°C, with inlet air at 7 bar and 45°C. Pressure dew point as per Class 5-ISO Standard 8573.1.

Maximum working conditions: Ambient temperature of 50°C, inlet air temperature 70°C and inlet pressure 14 bar (16 bar TFD 6-22).

The Pilot TFD 72 Refrigerated Compressed Air Dryer System operation is monitored by a digital thermometer in the control panel. The innovative new hot gas bypass valve incorporates greater precision and accuracy, preventing the formation of ice inside the evaporator under any load condition. Set during final testing, the valve requires no further adjustments.

All models are also fitted with a timed electronic drain, which allows for the adjustment of discharge and pause times. The generous sizing of the condenser ensures maximum performance of the refrigerant circuit and the ability to operate with changes in conditions, while also offering easy access for cleaning and maintenance.

Air Compressor Products

From air compressors through to compressed air storage, treatment and distribution, our extensive range of compressed air products ensures we have the right solution for your business needs, no matter the industry or application. We also offer custom-built packages and compressed air systems that are fit for purpose and tailored to your budget.

Frequently Asked Questions

What does “Built for Australian conditions” mean for the Pilot TFD72 system?

The Pilot TFD72 Refrigerated Compressed Air Dryer System is designed for Australia’s climate, with flow rates rated at 35 °C ambient, an efficient ALU-DRY heat exchanger, hot gas bypass valve, and oversized condenser to ensure reliability in Sydney’s hot and humid conditions.

What are the technical specifications of the TFD72?

The TFD72 system delivers 119.9 L/sec (≈ 254 CFM), operates on 240 V power, includes 1½″ BSP female inlet/outlet ports, and measures 354 mm (W) × 776 mm (D) × 987 mm (H) with a weight of 67 kg — making it well-suited for larger industrial applications in Sydney.

Does the TFD72 include safety and regulatory features trusted in NSW?

Yes, the Pilot TFD72 comes with an upgraded electrical control panel including a digital thermometer, a hot gas bypass valve to prevent evaporator freezing, a timed electronic condensate drain, and a generously sized condenser to maintain compliance and safety for Sydney operations.

What comes standard with the TFD72 package?

Every TFD72 unit is factory-tested and supplied with an ALU-DRY heat exchanger, hot gas bypass valve, condensate drain, upgraded digital control panel, and warranty coverage — making it ready for installation with minimal downtime.

How should I maintain the TFD72 for long-term reliability?

To keep your Pilot TFD72 system in peak condition, clean the condenser regularly, check that the condensate drain is functioning, inspect the hot gas bypass valve under different loads, and install the required 3-micron pre-filter upstream. Pilot Air also offers Sydney-based servicing and spare parts support.

Pilot Air Reviews

We have a growing manufacturing business and our air supply needed to be upgraded to deliver to a clean volume of air to specific machines and mainly our spray booth. 3 Months ago the team at Pilot Air evaluated our requirement and delivered an excellent solution, we have had time to run the system for a considerable time and found it to be excellent. Also Australian Manufactured to boot. Very Happy.

Brett

My husband recently bought a second hand Trademaster 12 air compressor in need of some maintenance. He took it to the Silverwater servicing centre with no prior arrangement. The staff were polite, obliging, and eager to help, and he was impressed with the service provided. Well done Pilot Air!

Donna Slater

I would just like to thank Debbie and the team at Pilot Air Compressors Service Department for a great job done this morning.
Excellent job done, Great Staff & Great Service
Thank you Debbie & the team at Pilot Air Compressors…
Geoff Bryce
Bryce Pest Control Pty Ltd.

Geoff Bryce

Thanks Pilot Air! We have just purchased our third pilot compressor (K50). Our oldest one (K25) is 14 years old and still going strong, used all day every day only replaced pressure switch.

Michael Mourad

The Compressed Air Experts

1300 667 579

NSW
Head Office & Manufacturing
115 Beaconsfield Street,
Silverwater, Sydney NSW 2128

Service and Spares Division
21-25 Stubbs Street,
Auburn, Sydney NSW 2144

Contact Pilot Air

Get in touch to see how we can help you find the right compressed air solution.

VIC Branch | Ph: 1300 667 579

QLD Branch | Ph: 07 3279 1213

WA Branch | Ph: 08 9424 2800

SA Branch | Ph: 1300 667 579